kimia sabz emrouz Company (Private Limited)

Warranty Terms for Different Types of Aaronx Electrodes:
Dear Customer, Pay particular attention to the following as an integral part of the warranty. Obviously, any failure to comply with any of the following will exclude the product from the warranty and the Company will not accept any liability for it.

• After preparing the device manual, you should read and write the pluskse.com manuals section of the Downloads section of the Persian Equipment Manual so that you can answer your questions during training. Talk about it. There is also a tutorial CD on the functional area of ​​the device inside the product cartoon to get acquainted with it. You should watch it to ask your questions if necessary.
• In Tehran, the place of delivery of the company's internal storage device is that the buyer must either self or his legal representative to confirm the apparent health of the device (being stiff, fractured or any other apparent defect) and after installation and installation training How to use the product is delivered and must be delivered to pluskse.com within the next 48 hours, completing the installation and warranty application form and posting the registration and sending information to the relevant unit. Send. Note that failure to submit this form at the time specified by the buyer will result in the withdrawal of the warranty and the Company will not be responsible for it.
• For the benefit of the present consumer, more training will be provided if the user needs further training through Skype or Uncle apps in coordination with the after-sales service unit.
• In cities where the buyer is not physically present at the location of the company, the vendor provides distance learning through the use of Skype or Uncle apps in coordination with the after-sales service unit, to improve this approach. The following steps are required. (First step: After preparing the manual for the installation, commissioning, you should read the pluskse.com service section of the after-sales service manual of the Persian Equipment Manual and also the training CD that Find out more about the device's functionality inside the product cartoon to see if you can ask it if you have any questions.
  Step Two: At this point, your doctor will look after the device. The appearance of the device should be monitored (textured, fractured, fractured or otherwise) by sending text to the device (observed Approved .............) Verify the health of the product, and then enter the third step.
  Step Three: In this step set up training and how to use it. You will be fully trained in the visual machine, and after completing your doctor's training, you will be confronted with a text message (hereinafter ..... I received all the necessary training at this stage). And approve the startup.)
• At the end of the training you must visit pluskse.com within the next 48 hours and complete the installation and warranty application form in the after-sales service and submit the registration and submission information to the relevant unit. . Please note that failure to submit this form at the time it is intended for the buyer to withdraw from the warranty is subject to no liability whatsoever. (The shipping cost is borne by the buyer.)
• The buyer has a one-year free visit to the equipment at the time of warranty. (If you would like to continue this service, you can visit pluskse.com and post an annual equipment service registration form in the after-sales service section). Complete and submit the registration and send the information to the relevant unit.)
• Be sure to use white alcohol-impregnated soft cloth (no disinfectants are recommended) to clean the machine. If the company does not comply with this instruction, it will not accept any liability.
• Removes fracture or loss of the device from warranty due to apparent breakage.
• In case of product failure and device service needs to be shipped to the company location and should not be reviewed or repaired by other people, in which case the machine will be out of warranty at the time of warranty and in case of non warranty Will not accept responsibility.
• Please visit pluskse.com in case of a malfunction and need of service and complete the crash service and technician request form in the after-sales service department and send it to the appropriate unit by logging in and sending the information.
li>
• In case of equipment failure and in need of service, trained and approved technicians should be employed otherwise the machine will be out of warranty at the time of warranty and will not be liable in case of non warranty.
• Prevent the device from being exposed to direct sunlight for longer (more than 30 minutes).
• All equipment of this company has one year warranty and ten years after-sales service.

Contact Us:

• Integers 87716-021 and Inner 4 88608958-0
• Telegram https://t.me/kimiayesabzemroz
• WhatsApp: https://api.whatsapp.com/send?phone=989197563284
• Email: This email address is being protected from spambots. You need JavaScript enabled to view it.

kimia sabz emroz Company (Private Limited)

Warranty Terms Different Types of Autoclave:
Dear Customer, Pay particular attention to the following which are an integral part of the warranty. Obviously, any failure to comply with any of the following will exclude any warranty from the Product and the Company will not accept any liability.

• After preparing the user manual of the autoclave user manual and the standard distilled water table, you should first read the pluskse.com Downloads section, the Persian Equipment Manual, so that you can ask any questions during the training. . You can contact the after-sales service department of the company to find out the dimensions of the Autoclave Desk Provider and follow the advice of our colleagues in this section.
• The place of delivery of the machine is the central warehouse door of the company and the buyer must present either himself or his legal representative to confirm the apparent health of the device (being stiff, fractured or any other defect) and delivering it to the desired location. . The cost of shipping the warehouse door is borne by the buyer.
• When ready to install the device at your desired location, the buyer should visit pluskse.com and complete the installation and warranty application form in the after-sales service and submit the registration and submission information to the relevant unit. . The technician will be deployed for 48 hours in Tehran and 72 hours in the city.
• The cost of installation is free of charge and only the cost of transportation and accommodation is borne by the buyer.
• At the time of warranty, the buyer is provided with a one-time annual equipment visit for free. If you would like to continue this service you can visit pluskse.com and complete the equipment sales service registration form in the after-sales service and submit the registration and sending information to the relevant unit.
• For the benefit of the consumer, more training will be provided by Skype or imo applications, in coordination with the after-sales service.
• Until the technician arrives, the device should not be returned to the device by any other person or persons, otherwise the device will be out of warranty.
• White fabric softened with white alcohol (no disinfectant is recommended) should be used to clean the machine.
• In case of equipment failure and service needs must be trained and approved by the company, otherwise the machine will be out of warranty at the time of warranty and will not be liable for any non warranty.
• In case of malfunction and need to send technician please visit pluskse.com and fill out the malfunction notification form in the after sales service department and send it to the relevant unit by registering and sending the information.
• Technicians will be dispatched in Tehran for a maximum of 24 hours and 48 hours in the city.
• Do not place the device in direct sunlight for longer (more than 30 minutes) separately.
• All equipment of this company has one year warranty and ten years after-sales service.

Ways to contact us:

• Telfax 87716-021 , 88608958-021  Internal 4 
• Telegram:  https://t.me/kimiayesabzemroz
• Whatsapp : https://api.whatsapp.com/send?phone=989197563284
• Email: This email address is being protected from spambots. You need JavaScript enabled to view it.

Kimai sabz emroz Company (Private Limited)

Warranty Terms Different Types of Instruments:

Dear Customer, Pay particular attention to the following which are an integral part of the warranty. Obviously, any failure to comply with any of the following will exclude the product from warranty and the Company will not accept any liability for it.

• You should first read the pluskse.com section of the Downloads section, the Persian Equipment Manual, after preparing the product user manual.
• The buyer should visit the pluskse.com site up to 48 hours after the product is completed and complete the installation and warranty application form in the after sales service and submit the registration and shipping information to the relevant unit. Note that failure to submit this form at the time specified by the buyer will result in the withdrawal of the warranty and the Company will not be responsible for it.The standard spraying time is suitable for any type of instrument with a propeller, shaft and bearing, every 30 minutes with a standard lubricant spray made from special oil or lightweight.The air pressure behind the turbine should be between 2.2 and 2.3 times.
• Failure to use standard compressor and oil free standard will cause premature breakdown of rotary parts after standard dental compressor is used.
• Instruments that have been damaged by a loss or other injury are not subject to warranty.
• Avoid immersing any type of instrument in any disinfectant or using any type of disinfectant spray to clean the equipment separately. The Company will not be responsible for any failure to comply with this instruction.In case of equipment failure and need for services, trained and approved technicians should be employed otherwise the machine will be out of warranty at the time of warranty and the company will not accept any liability in case of non warranty.The temperature required to sterilize all types of instruments is 134 ° C.
• All equipment of this company has one year warranty and ten years after-sales service.

Ways to contact us:

• Telfax 87716-021 و 88608958-021  Internal 4 
• Telegram:  https://t.me/kimiayesabzemroz
• Whatsapp: https://api.whatsapp.com/send?phone=989197563284
• Eamil This email address is being protected from spambots. You need JavaScript enabled to view it.